The 2000 series aluminum alloy (Al-Cu series alloy) is an aluminum alloy with copper as the main alloy element (the copper content is between 3-5%). It includes Al-Cu-Mg alloy, Al-Cu-Mg-Fe-Ni alloy and Al-Cu-Mn alloy, all of which are heat-treatable strengthened aluminum alloys. The alloy is characterized by high strength, commonly known as hard aluminum alloy (aircraft alloy), which has good heat resistance and processing properties, but its corrosion resistance is not as good as that of most other aluminum alloys, and intergranular corrosion can occur under certain conditions. Scope of application: aviation industry (2014 aluminum alloy), screws (2011 aluminum alloy) and industries with higher operating temperature (2017 aluminum alloy, 2017 aluminum alloy is a little lower in strength than 2014 aluminum alloy, but easier to process).
|
Aluminum Alloy |
Product Type |
Processing State |
Uses |
|
2014 |
Tube Rod Profile Forgings |
O、H112、T4、T4510、T4511、T6、T6510、T6511 |
Applicable to occasions requiring high strength and hardness (including tempering). Heavy forgings, thick plates and extruded materials are used in aircraft structures, multi-stage rocket first stage fuel tanks and spacecraft parts, wheels, truck frames and suspension parts. |
|
2017 |
Tube |
O、H112、T4、T4510、T4511 |
Rivets, general mechanical parts, aircraft, ships, transportation, building structural parts, transportation structural parts, propellers and accessories. |
|
2024 |
Tube |
O、H112、T4、T4510、T4511 |
Aircraft structures (skins, frames, rib beams, bulkheads, etc.), rivets, missile components, truck hubs, propeller elements and various other structural parts. |
|
2219 |
Tube |
O、H112、T6、T6510、T6511 |
Aerospace rocket welding oxidizer tank and fuel tank, supersonic aircraft skin and structural parts, the working temperature is -270 ~ 300 ℃. Good weldability, high fracture toughness, high resistance to stress corrosion cracking in T8 state. |
|
2618 |
Rod |
H112、T6、T6510、T6511 |
Thick plates are used as aircraft skins, bars, die forgings and free forgings are used to manufacture pistons, aero-engine cylinders, cylinder heads, pistons, wind guide wheels, roulettes and other parts, as well as heat-resistant parts that require work at 150-250 °C part |
|
2A50 |
Tube |
H112、T6、T6510、T6511 |
Medium-strength parts with complex shapes, engine compressor wheels, wind guide wheels, fans, impellers |
